Plastic Injection Moulding in China: A 2026 Guide for Melbourne Businesses

Quoted $40,000+ for a mould in Melbourne? Here's how plastic injection moulding in China really works for Australian businesses in 2026: tooling and part costs compared in AUD, which mould steel to choose, the DFM-to-T1 sample process, a worked 10,000-unit landed cost example and how to make sure you own your tool.

Plastic injection moulding machine and moulded parts for Melbourne businesses manufacturing in China
TK Wang
Last updated:
November 15, 2026

Last updated: 15 November 2026 · By TK Wang, Founder, Epic Sourcing

In short: Plastic injection moulding in China typically costs Australian businesses 40–70% less than local moulding, mostly because the steel mould (the "tool") is far cheaper to make there. A simple single-cavity production mould from a good Chinese toolmaker usually lands around AUD $4,000–$15,000, versus roughly two to four times that from a Melbourne toolroom. Expect 4–6 weeks to first samples (T1), 3–5 weeks for production, then about 3 weeks on the water to Melbourne. The catch: you need tight drawings, a DFM review, sample sign-off, and a contract that says you own the tool.

For years, I've watched clever Melbourne product businesses get quoted $40,000+ for tooling by a local moulder, choke on the number, and shelve a great product. That's a shame, because the maths often works fine offshore if you do it properly. Here's how plastic injection moulding in China actually works for Aussie businesses, what it costs, and where people get burnt.

What is plastic injection moulding?

Plastic injection moulding is a manufacturing process where melted plastic pellets are injected under high pressure into a steel or aluminium mould, cooled, and ejected as a finished part. Once the mould exists, each part ("shot") costs cents to a few dollars, so it's ideal for runs from a few thousand to millions of units.

Almost everything plastic around you is injection moulded: storage tubs, phone cases, power tool housings, bottle caps, toys, pet bowls and car clips. The big upfront cost is the mould itself. That's why where you make the mould matters so much.

How much does injection moulding cost in China vs Melbourne?

The biggest saving is in tooling. Part prices are also lower in China, but the gap narrows for tiny, highly automated parts. These are typical ranges we see across Epic projects in 2026 (AUD, ex-works, before freight and duty):

Cost itemChina (typical)Melbourne / local (typical)
Prototype / aluminium mould (low volume)$2,500–$6,000$8,000–$20,000
Single-cavity P20 steel production mould$4,000–$15,000$15,000–$45,000
Multi-cavity hardened steel mould (H13/S136)$15,000–$60,000+$50,000–$150,000+
Per-part price, small ABS/PP part$0.10–$0.60$0.30–$1.50
Time to first samples (T1)4–6 weeks6–12 weeks

Ranges swing hard with part size, complexity, number of cavities, surface finish and resin. Use them as a sanity check, not a quote. For a deeper breakdown, see our guide to tooling and mould costs.

Which mould steel do I need?

Mould material decides how many parts the tool will make before it wears out. Picking the wrong grade is the most common way buyers either overspend or end up re-tooling after a year.

1. Aluminium (prototype or bridge tools)

Good for roughly 5,000–50,000 shots. Cheap and fast, great for testing the market before committing to a full production tool.

2. P20 pre-hardened steel

The workhorse. Typically 100,000–500,000 shots. Right for most Aussie SMEs selling consumer products in the tens of thousands per year.

3. Hardened steel (H13, S136, NAK80)

500,000 to 1,000,000+ shots, better polish and corrosion resistance. Choose it for high volumes, glass-filled resins, clear parts or food-contact items.

What's the process for moulding plastic parts in China?

Here's the step-by-step we run for Melbourne clients. Skipping steps 2 and 5 is where most DIY projects go sideways.

1. Prepare 3D files and a spec sheet

Send STEP files plus 2D drawings with critical tolerances, resin (e.g. PP, ABS, PC, nylon, TPE), colour (Pantone), surface finish and annual volume.

2. Get a DFM (design for manufacturing) report

A good toolmaker flags draft angles, wall thickness, undercuts, gate locations and sink marks before cutting steel. Fixing a design in CAD costs nothing. Fixing it in steel costs thousands.

3. Compare three or more toolmakers

Quotes vary wildly for the same part. Compare steel grade, cavity count, mould life guarantee, hot vs cold runner, and who pays for modifications.

4. Pay the tooling deposit and cut the mould

Usual terms are 50% to start and 50% on T1 sample approval. Protect yourself with a manufacturing agreement before paying. Our guide to NNN agreements and IP in China covers this.

5. Approve T1/T2 samples

Check dimensions, fit, colour and finish. Most moulds need one or two rounds of tweaks. Lock in a golden sample once you're happy.

6. Production, inspection and shipping

Run a pre-shipment inspection against the golden sample, then ship. Shanghai or Ningbo to the Port of Melbourne is roughly 16–22 days at sea.

Worked example: what does a 10,000-unit run really cost?

Say a Dandenong homewares brand wants 10,000 PP storage containers with lids (two parts, one family mould). Indicative numbers:

ItemChina (AUD)Local (AUD)
Family mould, P20 steel$9,500$32,000
Parts (10,000 sets)$6,500$14,000
Packing, sea freight (LCL), local charges$2,800$0
Duty (5% on FOB value, if no ChAFTA certificate) + inspection$1,100$0
Total first order$19,900$46,000
Reorder (no tooling)$10,400$14,000

With a valid ChAFTA certificate of origin, duty on most Chinese plastics drops to zero, and GST is claimable for registered businesses. Run your own numbers with our China manufacturing cost guide.

When should a Melbourne business mould locally instead?

Offshore isn't always the answer. Local moulding still makes sense when:

  • Parts are large and light (e.g. bins, kayaks) and freight eats the saving.
  • You need tiny, frequent runs and can't hold stock.
  • The part is safety-critical and you want engineers in the same room every week.
  • Your annual volume is under about 2,000 units and a 3D-printed or urethane-cast part will do.

A smart middle path many of our clients use: cut the tool in China, ship it to Melbourne later if you want local production. Just make sure the tool is built to fit Australian press sizes and you own the drawings.

What compliance rules apply to moulded plastic products in Australia?

The product category, not the process, decides the rules. Food-contact items must not contaminate food under the Food Standards Code, so ask for food-grade resin certificates and migration test reports. Toys for kids under three, button-battery products and some baby products fall under ACCC mandatory standards. See our ACCC mandatory safety standards guide.

If your moulds or parts ship on timber pallets, they need ISPM 15 heat-treatment marks to clear DAFF biosecurity without fumigation.

Frequently asked questions

Who owns the mould when I make it in China?

You should, but only if your contract says so. Get a written tooling ownership clause, a mould number, photos of the tool and the right to move it to another factory. Without this, some factories treat the mould as theirs.

What's the minimum order for injection moulding in China?

Most factories want 1,000–5,000 pieces per run so the press setup is worth it. Small first orders are possible, but the per-part price rises.

How long does injection moulding in China take from start to delivery in Melbourne?

Plan for 10–14 weeks: about 1–2 weeks for DFM, 4–6 weeks to T1 samples, 1–2 weeks of tweaks, 3–5 weeks of production and around 3 weeks of shipping.

Is injection moulding cheaper in Vietnam?

Vietnam's moulding industry is growing fast, but toolmaking depth is still mainly in China's Guangdong, Zhejiang and Jiangsu. Many brands cut the tool in China and mould in either country. Our China vs Vietnam vs India comparison covers the trade-offs.

Can the same sourcing agent handle my packaging too?

Yes. Packaging is often the next step after moulding. If you're bottling a product, read our guide to custom glass bottles from China.

How Epic Sourcing helps

Epic has sourced 20,000+ products for 300+ happy clients, with bilingual teams on the ground in China and Vietnam who sit in the toolroom with your mould maker. We shortlist vetted moulders, run the DFM review, negotiate tooling and ownership terms, check T1 samples and inspect before shipping, saving clients around 77% on average versus local quotes. Learn more about importing products from China to Australia with us, check our pricing, or give us a bell to get your part quoted.

A food delivery startup takes on Uber

1800 00 EPIC
FREE DOWNLOAD

How to find reliable suppliers in China

  • What to look for when researching suppliers
  • Actionable advice from industry experts
  • Tips to help you save time and money
BY SUBMITTING THIS FORM YOU ARE SUBSCRIBING TO OUR MAILING LIST. VIEW OUR PRIVACY POLICY.
OUT SOURCE
how to import products from china from verified suppliers
BONUS: Manufacturer prospecting spreadsheet
⚠️ Please be aware of scammers who may be impersonating Epic Sourcing. If you have any concerns please direct email or call our hotline to double check before clicking links or providing personal information.