Australian clubs often source custom team kits offshore as sublimated polyester garments. Here's how to find a factory, approve samples and check quality before the season.

Last updated: 16 November 2026
In short: Australian clubs and teamwear brands often source custom kits from offshore manufacturers, including factories in China and Vietnam. Fully sublimated polyester garments are an established option. A practical path is to verify the factory, approve samples you can hold, and inspect the goods before they leave.
This guide is for Sydney clubs, school sport coordinators and small teamwear brands ordering jerseys, shorts, training tops and socks. It doesn't cover gym leggings or athleisure.
If you searched for sport clothing manufacturers or sports uniform manufacturers, you're in the right place. For gym wear and everyday activewear, read our guide to activewear and gym clothing manufacturers instead. For help placing the order, start with our clothing manufacturing service.
A sportswear manufacturer for team kits makes match and training clothing to your colours, crest and sizing, not a generic shop range. The usual set is a jersey or playing top, shorts, socks, and often a training top.
In Sydney, the buyer is often a volunteer club committee, a school sport coordinator, or a small teamwear brand. Rugby league, AFL, netball and touch football all need tough, washable kits that look the same in junior and senior sizes. Don't send a factory a league's official logo unless you have the right to use it. Use your own club crest and sponsor artwork.
A fully sublimated rugby jersey in polyester interlock is a different job from a cotton training tee with a small embroidered crest. Tell the factory the sport, garment, fabric and decoration method up front. If you don't, you won't get quotes you can compare.
Dye sublimation uses heat to transfer dye into the polyester fibres. The design becomes part of the fabric, rather than a separate layer sitting on top like a screen print or a sewn-on badge.
It works on polyester and high-polyester blends, and the more polyester, the brighter the result. Cotton-heavy cloth isn't the normal choice for a bright, durable sublimated print.
That's why sublimation suits full-colour team kits. You can print a full body design, sponsor logos, player numbers and a club crest in home and away colourways without a stack of screens. Because the dye sits inside the fibre, a genuine sublimated print doesn't crack or peel the way an applied print layer can. Screen printing or embroidery can still make sense for a simple training tee.
Ask the factory what polyester it'll use, including the fabric weight and whether the design has underarm mesh. Then approve a sample you can hold, not only a digital mock-up.
Both countries make synthetic teamwear, and either can be a good fit depending on the factory. China has a broad textile and apparel supply base, which can help when a kit has many colourways, sizes or extra items. Still, check each factory can actually handle your range.
Vietnam is an established option too, and it can be a second country if you don't want every garment made in one place. In our experience, Vietnam factories often bring in some fabric and trims from China, which can push MOQs higher. Our Vietnam projects have run about 30 to 40 days in production.
Don't pick a country from a headline. Compare two or three factories on sample quality, communication, and whether they're a factory or a trading company. Some firms that list "sportswear" on a directory are traders, so confirm who is making the garments before you pay a deposit.
Not every "sportswear factory" is a factory.
Confirm who will cut and sew your kit, and check the business, before you pay a deposit.
Get your supplier verifiedMOQ means minimum order quantity, the smallest number of pieces a factory will make in one run. For custom sublimated jerseys, factories may set that minimum per style, design or colourway. In our experience, apparel MOQs have run about 50 to 250 units, with mixed sizes allowed. Treat that as a guide, and ask each factory to state the MOQ for your jersey, shorts and socks separately.
Lead time is the time from approved sample to goods ready, plus freight to Sydney. Leave room for artwork, colour approval, samples, bulk production, inspection and shipping. In our experience, an apparel sample takes about 2 weeks from tech pack to sample in hand, and custom fabric printing takes about another 2 weeks.
In garments, sewing often starts around week 3 of a 30-day production run, once the fabric arrives. A 25-day quote can stretch to 35 or 45 days, so build in a buffer. Work backwards from the first game or the first school term, and don't treat a website's "quick turnaround" line as a plan.
If your order mixes junior and senior sizes, or home and away colourways, ask whether that still counts as one style. Get the answer in writing before you approve production.
A tech pack is the instruction file the factory follows. It should include flat drawings, measurements, fabric type and weight, colour references, crest and sponsor placement, and a size chart for junior sizes 6 to 14 and senior sizes S to 3XL. If you're new to this document, read our guide to tech pack essentials for apparel manufacturing.
Ask for physical fabric swatches first. A supplier who can't send swatches is a red flag. A size set is a physical sample in a range of sizes, so you can check fit on junior and senior players before bulk production. Not every factory includes one, so ask for it. Don't approve only a medium adult sample if half your order is kids' sizes. Our guide on how to get product samples from Chinese suppliers walks through that sample stage.
Build the checks into the order. Don't leave them until the cartons arrive in Sydney. We'd approve a golden sample in writing, then a pre-production sample made with the bulk fabric, print and trims. Keep a copy of the golden sample with the factory so the inspector can compare against it.
At the final inspection, garments are taken out of the cartons, photographed and measured, and checked for colour, logo placement, stitching, labels and packing. In our experience, one inspection day covers about 1,000 garments. A known risk is bulk colour fading compared with the approved sample, so check colour against the golden sample.
Here's that process for a Sydney rugby league club ordering a junior and senior kit. The kit is a fully sublimated jersey in polyester interlock with the club crest and sponsor logos, matching shorts, and ribbed socks. It comes in home and away colourways, in junior sizes 6 to 14 and senior S to 3XL.
| Step | What you send or check | Who does it |
|---|---|---|
| Tech pack and artwork | Drawings, size chart, fabric, colour references, crest and sponsor files | You, or your designer, send this to the factory |
| Fabric swatches and size set | Physical fabric, then fit and measurements across junior and senior sizes | You try them on players and send comments |
| Strike-off or colour approval | Printed swatches or a colour sample against your references | You approve or request a change |
| Golden and pre-production sample | One full kit signed off, then one made with the bulk fabric, print and trims | Factory makes it, you approve it in writing |
| Bulk production | The signed-off kit in all sizes and colourways | Factory, only after written approval |
| Pre-shipment inspection | Measurements, colour, print, stitching, labels and packing | You, a QC inspector, or both |
| Freight to Sydney | Packed cartons, shipping documents and delivery to the club | Your freight forwarder, with the factory's packing list |
It depends on the factory, and on whether home and away colourways count as one style or two. Ask for the MOQ on each garment, in writing, before you compare quotes.
For a full-colour polyester jersey with crests, numbers and sponsors, sublimation is well suited because the design is dyed into the fibres. Screen printing can still work on simpler garments. Choose the method that matches the fabric and the design, then approve a sample.
Leave time for artwork, samples, production, inspection and freight to Sydney. Start from the date of the first game and work backwards, with a buffer for delays.
Yes, you can ask for both. Teamwear factories can cut a mixed size run and print names and numbers from a roster you supply. Get the quote to confirm which sizes and designs count towards the MOQ, then check those details at inspection.
Yes. Clothing sold in Australia needs care labelling that meets the Consumer Goods (Care Labelling) Information Standard 2023. Instructions can be in English, the international care symbols, or both. Build the label into the tech pack so it's sewn in at the factory. Our guide to custom clothing labels and swing tags covers getting those labels made.
Epic can help a Sydney club or teamwear brand find a factory, check it, and manage the sample and inspection steps, so problems are more likely to be caught before the kit ships. We don't print the garments ourselves, and we don't act as a testing lab or a certifier.
Out Source is the full sourcing project, from shortlisting factories to managing the order. QC and factory audits cover the inspection before the cartons leave. Our Freight Forwarding service can manage the shipment to Sydney. Verification reports are typically turned around in under 48 hours, and Epic works with 300+ clients. See what each option includes.
Need a factory for next season's kit?
Tell us the sport, the garments and your timing, and we'll talk through the next steps.
Book a free discovery chat