RCM Mark and EESS Registration: What Australian Importers Need Before Selling Electrical Products

Selling electrical products in Australia? Here's what the RCM mark is, how EESS registration fits in, and what to get from your factory before you pay.

Minimal still life of a wall charger, desk lamp and small grey speaker on a light shelf, with a green tick badge
TK Wang
Last updated:
November 16, 2026

Last updated: 16 November 2026

In short: The RCM, or Regulatory Compliance Mark, is the shared mark that shows an electrical or electronic product meets the Australian electrical safety and ACMA rules that apply to it. In-scope electrical equipment sold in states that run the EESS must carry it, and ACMA rules require it on many electronic and radio products too. EESS registration is a separate step that an Australian or New Zealand responsible supplier does on a national database, and your overseas factory can't do it for you.

This guide is for a Sydney importer about to land electrical stock and sell it online or through a retailer. It covers what the mark means, how registration fits in, and what to get from the factory before you pay. For shipping and the rest of the import process, see our guide to importing electronics from China.

What is the RCM mark, and is it mandatory in Australia?

The Regulatory Compliance Mark is one mark used for both electrical safety and ACMA's communications and EMC rules. Those are still separate obligations, so the mark isn't one joint approval. State electrical safety regulators and the Australian Communications and Media Authority (ACMA) run the rules behind it. For in-scope products, the mark must be on the product before it's supplied.

People often search for "RCM certification". That phrase is loose. There isn't one certificate called that. You need evidence the product meets the right standards, a registered responsible supplier where the rules require it, and the mark applied correctly. For the highest-risk items, you also need a Certificate of Conformity.

What is EESS registration, and how does it differ from the mark on the product?

EESS stands for the Electrical Equipment Safety Scheme. It covers Queensland, Victoria, Western Australia and Tasmania, plus New Zealand. Under it, the responsible supplier registers on a national database, and higher-risk products are registered there too. Shoppers see the mark. Registration is the record behind it. The official site is eess.gov.au.

EESS sorts in-scope equipment into three risk levels, and every level needs the RCM:

  • Level 1 (low risk): you still need a registered responsible supplier and evidence the product is safe. Registering the product itself is optional.
  • Level 2 (medium risk): the product must be registered, backed by a compliance folder with test reports.
  • Level 3 (high risk): the product must be registered and linked to a valid Certificate of Conformity from a recognised certifier before it's sold.

You can't pick a lower level to save paperwork. The equipment definitions decide the level.

Do you need EESS registration if you only sell in Sydney?

The EESS says that if a product is sold only within NSW, and nowhere else, you don't need to register it with the EESS. NSW Fair Trading has its own rules for that case, so check with them on marking and approvals.

Most Sydney brands don't stay inside NSW, though. If you sell online and ship to Brisbane, Melbourne or Perth, you need EESS registration to meet the rules in the states that apply it. So if you sell nationally, plan to register from the start.

Which imported products need RCM and EESS?

It depends on the product's rated voltage and what it's used for. EESS covers equipment that works above 50 volts AC (or 120 volts DC) and is meant for household, personal or similar use. That takes in most gear that plugs into the wall. Products with radios, like Bluetooth, also fall under ACMA rules, whether or not EESS applies. Here's how that plays out for three SKUs a Sydney retailer might import.

ProductEESSACMAWhat must be in place before you sell
30W USB-C wall charger, Australian Type I plug, white and black, with 1.5 m USB-C to USB-C cable in the boxIn scope, Level 3, under power supplies and chargers. The 30 W rating doesn't exempt it.EMC rules applyA registered responsible supplier, a valid Certificate of Conformity linked to the equipment registration, the RCM on the charger, and the evidence on file
LED desk lamp with a separate mains-to-12V driver and touch dimmer, matte white and oak-look baseThe separate mains driver is in scope, normally Level 3. The 12V lamp on its own is outside EESS, but it still has to be safe. A lamp with a built-in mains driver is assessed as one complete product.EMC rules may applyFor the driver, the same steps as the charger
Portable Bluetooth speaker, USB-C charging, 2,000 mAh battery, charcoal and sand, no mains charger in the boxNormally outside EESS, because it runs at low voltage and no mains charger is suppliedRadio and EMC rules applyCompliance records, registration as a responsible supplier on the same national database (for ACMA purposes), and the RCM applied before supply

Use this table as a starting point, not a ruling. Your product's exact design, accessories and power supply change the answer. If you also need the tariff code for these products, see our HS code guide for Australian importers, because classification and the safety pathway are separate questions.

Who is the responsible supplier when you import into Sydney?

The responsible supplier is the Australian or New Zealand manufacturer or importer that first receives the product for sale here. For imported goods, that's usually the importer. It must be a legally identifiable Australian or New Zealand entity with an ABN or a New Zealand IRD number.

An overseas factory can't be your EESS responsible supplier. Neither can an agent who only helps with compliance. So if you're a Sydney brand importing chargers, it's you. You register, you hold the evidence, and you answer if a regulator asks. As the importer, you're responsible for compliance.

Our ACCC mandatory safety standards guide covers the other safety rules that can apply on top of this.

What test reports and paperwork should you get from the factory before you place the order?

Get the evidence before you pay the deposit, not after the goods are on the water. Ask for:

  • A Certificate of Conformity for Level 3 items: issued by a recognised certifier for your exact model, so it can be linked to your EESS registration. A lab report on its own doesn't let you sell or apply the RCM.
  • Safety test reports: for Level 2 items these go in your compliance folder, and for Level 3 they sit behind the certificate.
  • EMC and radio test reports: for chargers, mains drivers and anything with Bluetooth.
  • A label proof: artwork showing the RCM and your supplier details where they're needed.
  • A matching model number: every report and certificate must name the exact model and variant you're buying.

Check the paperwork is for your model, not a similar one. A report for a 20W charger doesn't cover a 30W version. If the factory goes quiet when you ask, treat that as a warning sign. Our China quality control page explains how inspections fit in.

Not sure your factory's paperwork is real?

Check the supplier and their documents before you send a deposit.

Get your supplier verified

When should the mark be applied, and what does a correct label look like?

The product has to be correctly marked before it's supplied. That's why the label proof matters. Fixing artwork before production is far easier than relabelling stock in a Sydney warehouse.

Under EESS, the RCM normally goes on the outside of the product, as close as possible to the model number, following the AS/NZS 4417 marking standard. Packaging alone isn't an option unless the regulator approves an alternative. ACMA has its own labelling rules, so check them for anything with Bluetooth.

For the white and black chargers, check that both colourways show the mark clearly. Get a photo of a finished sample with the mark on it before mass production starts.

What are the risks of selling without RCM or EESS registration?

Selling in-scope gear without the right registration or mark breaks electrical safety law in the states that run the EESS. Regulators can act against the supplier, including penalties set under each state's law and product recalls. ACMA can also act on products that don't meet its labelling rules. Either way, your stock sits in a warehouse and doesn't sell.

The bigger risk is safety. A charger that hasn't been tested properly can overheat. Getting the evidence right protects your customers and your business.

FAQ

Is the RCM mark mandatory in Australia?

For in-scope products, yes. That means in-scope electrical equipment sold in states that run the EESS, and products covered by ACMA's labelling rules. Whether your product is in scope depends on its voltage, what it's used for and whether it has a radio.

What's the difference between the RCM mark and EESS registration?

The RCM is the mark on the product. EESS registration is the record a responsible supplier makes on the national database. Level 2 and Level 3 products must be registered there too.

Can my Chinese or Vietnamese factory register on the EESS database for me?

No. The responsible supplier must be an Australian or New Zealand entity with an ABN or a New Zealand IRD number. The factory supplies the test evidence, and you register.

Do USB chargers, LED lamps and Bluetooth speakers all need the RCM?

Yes, but for different reasons, and they don't all need EESS registration. A mains USB-C charger is EESS Level 3, and so is a separate mains LED driver, while a 12V-only lamp is outside EESS. A Bluetooth speaker with no mains charger is normally outside EESS but still needs the RCM under ACMA rules.

Can I land a shipment in Sydney first and register afterwards?

Registration and the mark need to be in place before you supply the goods. Selling is the test, not landing. It's still safer to sort it before the stock ships, because relabelling is slow and costs money.

How Epic Sourcing helps

Epic doesn't certify products or act as a testing body. What we do is help you find factories that hold current test reports for your exact model, check those reports with the issuer, and coordinate lab testing or inspections when needed. We also check that label proofs and packing marks match before mass production. In our experience, many online suppliers claim Australian certification they don't hold, so we check certificates with the issuer.

If you're still choosing a factory, Out Source covers the search. Verification reports check the supplier, typically in under 48 hours, and QC and factory audits check the goods before they leave. See what each option includes and our electronics import service. New to this? Start with importing electronics from China 101.

Got electrical products on the way?

Tell us what you're importing and we'll map out the checks with you.

Book a free discovery chat

A food delivery startup takes on Uber

1800 00 EPIC
FREE DOWNLOAD

How to find reliable suppliers in China

  • What to look for when researching suppliers
  • Actionable advice from industry experts
  • Tips to help you save time and money
BY SUBMITTING THIS FORM YOU ARE SUBSCRIBING TO OUR MAILING LIST. VIEW OUR PRIVACY POLICY.
OUT SOURCE
how to import products from china from verified suppliers
BONUS: Manufacturer prospecting spreadsheet
⚠️ Please be aware of scammers who may be impersonating Epic Sourcing. If you have any concerns please direct email or call our hotline to double check before clicking links or providing personal information.